Take a rag or dry cloth or paper towel and rub the bearings to remove all grime and dirt. You have to make a solution for cleaning.

How To Clean Skateboard Bearings Tactics Youtube Skateboard Bearings Skateboard Cleaning

Next use a pin or paperclip to pry the rubber shields from the bearings.

How to clean skateboard bearings. If the amount of dirt is normal take a paper in hand and clean the bearings with papers. If you used a skateboard bearing cleaner then you dont need to rinse with the alcohol unless the instructions on the cleaner say you should do that. How To Clean Your Skateboard Bearings In 10 Simple Ways.

The adolescents are slashing streets and railings. In this video I show you how to clean your bearings without a bearing cleaning kit. After youve let your skateboard bearings soak in the cup of isopropyl alcohol for at least 30 mins take each bearing out individually and use a paper towel to wipe them clean and dry.

Pour down the liquid diluter on the bearings. Cap the container and shake for 5 minutes. There are 65 million skateboarders in the United States as of 2018 according to Statista.

It can be done cheap. Ensure that the bearings are fully submerged into the cleaner. Here is a short video that shows you how to clean skateboard bearing.

You may need to do a small amount of prying the bearing from the wheel but do so gently so that you do not damage the bearing upon removal. Then gently rub them with a dry rag or a paper towel to remove any visible dirt and grime. Cleaning your bearing is essential for fast long-lasting bearings.

Now you have to leave the bearing in the cleaner for 5 minutes after which you will remove them from the container. To clean skateboard bearings start by removing the wheels from your skateboard and using a screwdriver to pry the bearings from the wheels. Well give you step-.

Now is a good time to clean your bearings. Skateboarding has always been filled with passion and adventure. If this method is not working then follow another method.

After that use the microfiber cloth to dry it off completely Then use the grip gum method to clean it totally. Remove the wheels from the skateboard using pliers and a screwdriver or a T Tool and screwdriver. If your bearings are still coated in nasty repeat the process.

Set the bearings out to dry. Alternately tap them on the bottom of the bowl and spin the bearings in your hand until they feel grit-free. Take out the clean bearings and immerse them in another bowl with solvent.

Itll save you money in the long run and is kind of fun to do anyway. Thanks for watching and have a great daynight. How To Clean Skateboard Bearings The main dirt and grime have to be cleaned manually at the beginning of cleaning the bearing.

This type of removal does not work for bearings that are in Aluminum Hub wheels. This wont work on the damp grip tape. SKATEBOARDING MADE SIMPLE VOLUMES 1-6 AVAILABLE NOWGET.

After the soaking take out the bearings from the bowl and dry them with a condensed air can. Gently wipe the loose dust and dirt from the bearings with a dry cloth or a dry paper towel. Once you get a bearing cleaned spin it dry and place it on a clean paper towel balls down to dry.

Fill up a bowl or container with a citrus cleaner then drop your bearings into the liquid. You can use small repetitive strokes to clean the grip tape thoroughly till you reach one end from the other. Carefully swirl the liquid to remove the dirt.

If any of the debris is difficult to remove do not try to do it at this point. Gently swish the solution around to get some movement inside the jar or can that you are using to soak the skateboard bearings. Press the button on the top and place the tool onto the center of the bearing the hole that slips onto the axel of the skate like a doughnut hole release the button and pull the bearing straight out of the wheel.

Fill up your bowl with 12 of acetone and put the bearings balls down in the solution and let them sit for a minute. Free the bearings from the wheel using the needle-nose pliers. Put the bearings in a container WITH A LID and fill it to the brim with isopropyl alcohol.

If the dirt is stubborn then just apply some solvent to the dry rag and scrub the bearings to remove gunk properly. Remove the bearings and rinse them off with the alcohol.